The Stiebel Eltron DHC6-2 tankless water heaters are designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated. The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service. The Stiebel Eltron models DHC 3-1, DHC 3-2 and DHC 4-2 are shipped with 0.5 GPM pressure compensating flow reducer / aerators that fit on most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. • Up to 50% less power consumption compared to storage type heaters Electric tank type water heaters are subject to stand-by losses which amount to 15 - 20% of the kWH used. • Hot water instantly The Stiebel Eltron DHC6-2 heats water instantaneously as you require it - and only when you require it. • Unlimited supply of hot water The Stiebel Eltron DHC6-2 heats water instantaneously providing an unlimited supply of hot water. • Seismic proof construction The Stiebel Eltron DHC6-2 series is a tankless water heater system, and is thereby not subject to seismic code. There is no need for preventative construction, as required when using a tank type water heater. ![]() DHC Internal View • Lower installation costs compared to tank type units • Exclusive built in scald guard thermostat • Available in many different kW sizes • Available for 120v, 208v, 240v, and 277v The Stiebel Eltron DHC6-2 tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting: Office Buildings In a residential setting, they are suited for the following applications: Bathroom Sinks
|