Titan N120 SCR2 Electric Tankless Water Heater

Requires #6 AWG Wire and a 60 AMP Double Pole Breaker

By heating water only as it is needed the TITAN®-SCR2 Digital Electronic Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. The TITAN-SCR2's high efficiency is in part due to its dedicated digital microprocessor that samples input and output temperatures 21 times per second.

This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest the TITAN®-SCR2 uses no power at all.

Available in seven models the TITAN®-SCR2 is ideal for a wide range of application. One TITAN®-SCR2 unit can supply the hot water needs of home and apartments, and in some applications, energy saving can pay back unit cost in less than one year.

Due to its shielded incoloy heating elements and copper & brass casing, the TITAN®-SCR2 is ideal in any application where mineral deposits shorten the life of a conventional water heater.

The TITAN®-SCR2 Tankless Water Heater comes with a 10 year warranty on all water-carrying components and all other parts are warrantied for one year. Installation is quick and easy, requiring no venting and the TITAN®-SCR2 compact size allows installation almost anywhere. The TITAN®-SCR2 is without a doubt the Tankless Water Heater for the 21st century.

Specifications
Compliance Listing  Tested Dade Approval Dimensions Weight Materials Pipe Fitting Pressure Requirements Voltage Elements Energy Efficiency Activation Indicators Warranty Protection UL-#499 E212386 MET Laboratories  # 97-0627.16 7" W x 10" H x 2-3/4 D 8 Pounds Brass Casing 1/2" Standard Pipe 5 PSI-Min./150 PSI-Max 220 VAC Std.(208/277 Avail.) Dual Incoloy / Nichrome Up to 99.5% 0.4 GPM-on/).3 GPM-off Red-on/Amber-stand by 10 years on casing 1 year on components  Digital Temperature Control - Manual Resetable Thermostat
Multiple Patents Pending
Note that the KW and Amps are controlled by the setting on the Power Mode. Check specifications on unit used. Voltage, amperage, breaker and wire may vary depending on local electrical standards. Consult a professional plumber or electrician for guidance. The electrical specifications are based on 220 volts. It should be noted that higher voltage will increase power, just as lower voltage will have the reverse effect. The (POWER MODE CONTROL) can be adjusted to compensate allowing the user to increase or decrease water temperature. For best performance adjust temperature at MEDIUM FLOW (approximately 1 GPM) this is the average water flow at any faucet with an aerator. Remember, that any adjustments made on your unit will take seconds to reach point of use. DO NOT OVER HEAT WATER. Water temperature from 105F to 120F is adequate for all practical purposes
Electrical Specifications Model Max KW at 220V Volts Max Amps at 220V N-120 11.8KW 220V 54 N-100 10.8KW 220V 49 N-85 8.5KW 220V 38 N-75 7.5KW 220V 34 N-64 6.4KW 220V 29 N-42 4.2KW 220V 19 N-10 3.2KW 110V 29* * N-10 uses 110 volts and will supply only warm water.